Haltom City |
Code of Ordinances |
Chapter 98. WATER AND SEWERS |
Article VI. LIQUID WASTE DISPOSAL |
Division 2. LIQUID WASTE TRANSPORTATION |
§ 98-249. Same—Inspection.
A liquid waste transporter's vehicle shall be inspected by the approving authority prior to the issuance of a vehicle permit with qualifications as follows:
(1)
A vehicle with a single tank as an integral portion of vehicle to transport liquid wastes is required; portable tanks or other containers temporarily installed in vehicles are prohibited;
(2)
Piping, valves and connectors shall be permanently attached to tank and/or vehicle;
(3)
Tank to be liquidtight;
(4)
Tank to be constructed so that every interior and exterior portion can be easily cleaned;
(5)
Piping, valves, and connections shall be accessible and easy to clean;
(6)
Inlet, or opening of tank to be constructed so that collected waste will not spill during filling, transfer, or during transport;
(7)
Outlet connections to be constructed so that no liquid waste will leak, run, or spill out from other than the point of discharge;
(8)
Outlets to be of a design and type suitable for the liquid waste handled and capable of controlling flow or discharge without spillage or undue spray on or flooding of immediate surroundings while in use;
(9)
Pumps, valves, cylinders, diaphragms and other appurtenances to be of a design and type suitable for the type of waste handled, capable of operation without spillage, spray, or leakage, and capable of being easily disassembled for cleaning.
(Code 1973, § 21-119; Ord. No. 1201, § 1-5, 10-18-84)